Upgrade to
Stainless Steel

Mr. Fizz Sr Stainliess Steel


Mr.Fizz has been spotted at this Key West establishment numerous times trying to establish the basis for new beverage recipes, styles and trends. We welcome your photo of where you might enjoy seltzer as or in your favorite beverage.
September 11 Twin Towers

Mr. Fizz Seltzer Products

This Rechargeable Seltzer Bottle from Mr. Fizz can turn ordinary water into sparkling seltzer – naturally with CO2.
Just add water, charge, chill and you've got Fizz.

Mr. Fizz Senior - Classic Stainless Steel

MR. FIZZ SENIOR

Classic Stainless Steel - 1 Liter

All stainless steel body with timeless head design. This item is the only seltzer bottle with a LIFETIME WARRANTY! One box of 10 CO2 cartridges in each unit.

Item 11105

$149.50 each
(Includes Box of 10 CO2 Cartridges)

 

Mr. Yukio Endo

Mr. Yukio Endo

6 Units per Carton

The very finest home carbonation unit sold. Each unit is thoroughly test\ed to assure complete satisfaction. It is our heavy duty unit.

UNIQUE DESIGN - This seltzer bottle is the design of Mr. Yukio Endo, an Engineer of the manufacturer, Nippon Tansan Gas Company in Tokyo, Japan. It's timeless beauty and function will offer you many years of service.

Submitted to the Museum of Modern Art in NYC and used in dozens of movies worldwide, this unique product captures the essence of practical function and design. Heads of State and Royalty from around the World have all enjoyed fresh made seltzer from this product.


Directions - Download PDF

IMPORTANT! - Read Care and Safety Warnings before use

6 SIMPLE STEPS TO SELTZER

Step 1- ASSEMBLE
Push the OVERFILL SLEEVE into the bottle, smooth, narrow end first until top is flush with top of body.

Step 2- FILL
Add ice cold water through the center of the OVERFILL SLEEVE until water rises to top. IMPORTANT: Never fill without OVERFILL SLEEVE in place! An air pocket must exist over the water level for gas expansion.

Step 3- ASSEMBLE
Insert the SYPHON TUBE WITH WASHER into the bottle, through the center of OVERFILL SLEEVE.

Step 4- ASSEMBLE
Screw on the SYPHON HEAD clockwise firmly. WARNING: Do not remove the SYPHON HEAD unless the gas pressure has been relieved from the BOTTLE.

Step 5- GAS CHARGING
Take one 8g CO2 CARTRIDGE and insert it into the CARTRIDGE HOLDER small end first. Turn the loaded CARTRIDGE HOLDER onto the SYPHON HEAD at the PIERCING AREA. Turn on completely so make a tight seal. WARNING: 8g CO2 Cartridges contain high pressure. Do not heat or store above 140°F. Never use more than one CO2 Cartridge to charge.

Step 6- DISPENSING
Shake well and dispense into a glass by slowly squeezing the DISPENSING LEVER ARM. WARNING: Do not attempt to remove the SYPHON HEAD without first releasing ALL the internal pressure from the BOTTLE by first squeezing the LEVER ARM.

Click Image to Enlarge

WARNING! High Pressure Device
Keep from children. Discontinue use if damaged, leaking or broken.

Additional Support Information

 

glassRecipes - Click Here

Make recipes we have received from our customers – some Nonalcoholic – some with a Zing – some for Food Preparation. We're always adding something new to add a little Fizz to your life!

 

Replacement Cylinders - Click Here

 Mr. Fizz

Limited Lifetime Warranty

Leland Limited, Inc. will provide lifetime warranty service on all metal parts and components at no cost to the original owner. Rubber and plastic items are covered for a period of one year from date of purchase. After that they may be ordered from Leland for a small fee. Defective items may be replaced or repaired at our discretion. There is a small fee for return freight service.

All warranty claims must be made by first contacting Leland Limited, Inc.

 

FAQs

After charging the bottle with a CO2 cartridge, do I need to leave the cartridge 'on' or can I remove it?
Answer: Once charging is complete you can remove the cartridge and CARTRIDGE HOLDER.

How do I know the bottle has been charged?
Answer: When following STEP 5, you will hear the gas transfer from the cartridge to the BOTTLE. Also, you can squeeze the LEVER ARM and if charged, the water will dispense.

How do I achieve more fizz?
Answer: CO2 needs to become saturated into the water. This is accomplished by very cold water and the pressure from the CO2 gas. Shaking the bottle immediately after charging will also help mix things up. Placing the charged device into the refrigerator for several hours will help too. But don’t shake it prior to dispensing, that releases gas from the water. If you are still not satisfied, your bottle may be leaking gas pressure. Leaking gas will show up as bubbles when the device is placed in water. Please ­ discontinue use and contact us for service if your device is leaking.

Can I add Flavors and Syrup?
Answer: Yes! But only put them in your glass, not the BOTTLE. Adding anything but water to your BOTTLE will cause foaming, usually due to sugar.

More FAQs

To Order
Phone pict (800) 984-9793 (Outside NJ)
(908) 668-1008 (Within NJ)
Fax: (908) 668-7716 (24hrs/day)
No shopping cart Although we currently do not have shopping cart capabilities on this site... Mr. Fizz is undergoing rigorous training to handle your future shopping needs. It has been our tradition to sell our products in retail stores – so we encourage you to visit your local retailer. If a retailer near you does not carry our product, please contact us and we will do our best to help.
Email pict
boss@mrfizz.com
(Contact a sales representative)

 

 

   Rev 07.0

 
 

Mr. Fizz Home | Seltzer Bottle Home | PicnicTap Home | About Seltzer | Seltzer Recipes | Contests | Seltzer Bottle Products
Seltzer Product Support | Product Registration | Seltzer Club | Health Related | Fizz Fun | Fizz Facts | Fizz History | Press Releases
Retailers/Wholesalers | Contact Us | Leland Cylinders

 
Copyright ©2007 Leland Ltd • All Rights Reserved
Site designed by KayDesign